for mounting on din-rail housing 17.5mm wide suitable both 0.2% supply ? output: 5 a spdt r elay type daa51 type daa51 property for back and front panel mounting. ranges within 0.1 s and 100 hour. multi-voltage delay on operate timer with 7 selectable time 1 din-rail spdt mini-d product description delay on operate ? time range 0.1 s to 100 h ? knob selection of time range ? knob adjustable time setting ? automatic start ? repeatability: ? for mounting on din-rail in accordance with din/en 50 022 ? combined ac and dc power supply ? led indication for relay status and power supply on output rated insulation voltage 250 vac (rms) contact ratings (agsno 2 ) resistive loads ac 1 5 a @ 250 vac dc 12 5 a @ 24 vdc small inductive loads ac 15 2.5 a @ 250 vac dc 13 2.5 a @ 24 vdc mechanical life 30 x 10 6 operations electrical life 10 5 operations (at 5 a, 250 v, cos ? =1) operating frequency < 7200 operations/h dielectric str ength dielectric voltage 2 kvac (rms) rated impulse withstand voltage 2.5 kv (1.2/50 s) output specifications type selection time specifications time ranges knob selectable 0.1 to 1 s 1 to 10 s 6 to 60 s 60 to 600 s 0.1 to 1 h 1 to 10 h 10 to 100 h setting accuracy 5% timers power supply overvoltage cat. ii rated operational voltage (iec 60664, iec 60038) thr ough terminals: 24 to 240 vac + 10% -15%, 45 to 65 hz voltage interruption 10 ms rated operational power dc supply 1.5 w supply specifications repeatability 0.2% time variation within rated power supply 0.05%/v within ambient temperature 0.2%/c reset power supply inter ruption 200 ms ? 17.5 mm din-rail housing (din 43880) 24 vdc and 24 to 240 vac mounting output housing a1, a2 m24 24 vdc 15% and ac supply 4 va spdt
electromagnetic compatibillity ready for a new time period. if the power supply is interrupted for at least 200ms before is interrupted for at least 200ms operates and does not release until the power supply supply is connected. at the end of the set delay the relay relay turns on. the set delay period begins as the power the yellow led flashing when timing, is on as soon as the 2 power on delay 100 ms indication for power supply on led, green output relays on led, yellow (flashing when timing) environment (en 60529) degree of pr otection ip 20 pollution degree 2 (iec 60664) operating temperature -20 to +60c, r.h. < 95% storage temperature -30 to +80c, r.h. < 95% housing weight 75 g screw terminals tightening tor que max. 0.5 nm according to iec en 60947 approvals ul, csa ce marking ye s emc immunity according to en 61000-6-2 emission according to en 6 1000-6-3 general specifications wiring diagram centre knob: time setting on r elative scale: from 1 to 10 with respect to the chosen range. lower knob: setting of time range mode of operation operating diagram rel t tensione di alimentazione led off power supply relay on daa51 dimesions 17.5 x 81 x 67.2 mm material pa66 rina time setting a1 15 y1 16 18 a2 5.5 67.2 18.7 45 17.5 81 2 dimensions 3 the relay operates the time is set to zero and the circuit is
|
